McCLIM Installation
David Dmytryk
ddmytryk at icloud.com
Tue Apr 9 11:02:06 UTC 2019
Will look into it Andreas. I have McClim running, but not using Truetype
Thanks for responding
David
> On Apr 9, 2019, at 2:52 AM, Andreas Davour <ante at update.uu.se> wrote:
>
>
> From your path I'm guessing you're on mac? There is a tool called "fontconfig" for linux. It could be that someone decided to call out to that program, expecting it to be around. It's a guess, and I don't have the source nor time to confirm at the moment. If someone don't have a better suggestion it might be worth following up on.
>
>
> /andreas
>
>> On Mon, 8 Apr 2019, David Dmytryk wrote:
>>
>> Stas
>>
>> Your suggestion to check asdf version prompted me to check version of CL-PPCRE. It was old - I replaced it with latest version and placed the entire cl-ppre-master folder in my home quicklisp/local-projects/libraries folder. It solved the “standard-optimize-settings” problem.
>>
>> However, when loading McCLIM now getting an error:
>>
>> NOTE:
>>> * McCLIM was unable to configure itself automatically using
>>> fontconfig. Therefore you must configure it manually.
>>>
>>> While executing: MCCLIM-TRUETYPE::WARN-ABOUT-UNSET-FONT-PATH, in process Listener(4).
>>
>> I checked for availability of truetype, and found a TTF folder which I also copied to my Quicklisp local-projects folder. Tried re-running load McCLIM and still shows same problem. The detailed lisp response is below.
>>
>> Again, would appreciate any advice from you or anyone else who might help resolve.
>>
>> Thanks
>>
>> David
>> __________________________________________
>>
>> Details:
>>
>> ? (ql:quickload 'mcclim)
>>
>> To load "mcclim":
>> Load 1 ASDF system:
>> mcclim
>> ; Loading "mcclim"
>> ...
>>> Error:
>>>
>>> NOTE:
>>> * McCLIM was unable to configure itself automatically using
>>> fontconfig. Therefore you must configure it manually.
>>>
>>> While executing: MCCLIM-TRUETYPE::WARN-ABOUT-UNSET-FONT-PATH, in process Listener(4).
>>> Type cmd-/ to continue, cmd-. to abort, cmd-\ for a list of available restarts.
>>> If continued: Proceed
>>> Type :? for other options.
>> 1 > ?
>> The following toplevel commands are available:
>> <n> the same as (:C <n>)
>> (:FUNCTION FRAME-NUMBER) Returns the function invoked in backtrace frame <frame-number>. This may be useful for, e.g., disassembly
>> (:FORM FRAME-NUMBER) Return a form which looks like the call which established the stack frame identified by <frame-number>. This is only well-defined in certain cases: when the function is globally named and not a lexical closure and when it was compiled with *SAVE-LOCAL-SYMBOLS* in effect.
>> (:SET-LOCAL NAME FRAME-NUMBER NEW) Set value of argument denoted <name> (see :LOCAL) in frame <frame-number> to value <new>.
>> (:LOCAL NAME FRAME-NUMBER) Return value of local denoted by <name> in frame <frame-number> <name> can either be a symbol - in which case the most recent
>> binding of that symbol is used - or an integer index into the frame's set of local bindings.
>> (:SET-ARG NAME FRAME-NUMBER NEW) Set value of argument named <name> in frame <frame-number> to value <new>.
>> (:ARG NAME FRAME-NUMBER) Return value of argument named <name> in frame <frame-number>
>> (:V N FRAME-NUMBER) Return value <n> in frame <frame-number>
>> (:RAW N) Show raw contents of backtrace frame <n>
>> (:APPLY-IN-FRAME I FUNCTION &REST ARGS) Applies FUNCTION to ARGS in the execution context of the Ith stack frame
>> (:RETURN-FROM-FRAME I &REST VALUES) Return VALUES from the I'th stack frame
>> (:F N) Show backtrace frame <n>
>> (:C &OPTIONAL N) Choose restart <n>. If no <n>, continue
>> (:B &KEY START COUNT SHOW-FRAME-CONTENTS) backtrace
>> :NFRAMES print the number of stack frames accessible from this break loop
>> :R list restarts
>> :Q return to toplevel
>> :GO continue
>> :A exit current break loop
>> :POP exit current break loop
>> :KAP Release (but don't reestablish) *LISTENER-AUTORELEASE-POOL*
>> :SAP Log information about current thread's autorelease-pool(s) to C's standard error stream
>> :RAP Release and reestablish *LISTENER-AUTORELEASE-POOL*
>> :? help
>> :PWD Print the pathame of the current directory
>> (:CD DIR) Change to directory DIR (e.g., #p"ccl:" or "/some/dir")
>> (:PROC &OPTIONAL P) Show information about specified process <p>/all processes
>> (:KILL P) Kill process whose name or ID matches <p>
>> (:Y &OPTIONAL P) Yield control of terminal-input to process
>> whose name or ID matches <p>, or to any process if <p> is null
>> Any other form is evaluated and its results are printed out.
>> 1 > q
>> ?
>>
>>> On Apr 7, 2019, at 12:20 PM, Stas Boukarev <stassats at gmail.com> wrote:
>>>
>>> I can only suggest deleting quicklisp and retrying.
>>>
>>>> On Sun, Apr 7, 2019 at 7:19 PM David Dmytryk <ddmytryk at icloud.com> wrote:
>>>>
>>>> CL-USER> (asdf:asdf-version)
>>>> "3.2.0"
>>>> CL-USER>
>>>>
>>>>
>>>> The error message is:
>>>>
>>>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.
>>>>
>>>>
>>>> The installation is using …util.lisp from the cl-unicode folder, different than the cl-ppcre folder. Not sure whether this is a problem
>>>>
>>>>
>>>>
>>>>> On Apr 7, 2019, at 12:05 PM, Stas Boukarev <stassats at gmail.com> wrote:
>>>>>
>>>>> Where does
>>>>> Invoking restart: Ignore attempt to IMPORT
>>>>> "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE"
>>>>> come frome?
>>>>>
>>>>> And what's your (asdf:asdf-version)?
>>>>>
>>>>>> On Sun, Apr 7, 2019 at 7:03 PM David Dmytryk <ddmytryk at icloud.com> wrote:
>>>>>>
>>>>>> Here is result of loading and testing cl-ppcre, then loading mcclim:
>>>>>>
>>>>>>
>>>>>> CL-USER> (ql:quickload :cl-ppcre)
>>>>>> To load "cl-ppcre":
>>>>>> Load 1 ASDF system:
>>>>>> cl-ppcre
>>>>>> ; Loading "cl-ppcre"
>>>>>>
>>>>>> (:CL-PPCRE)
>>>>>> CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre)
>>>>>> #<TEST-OP>
>>>>>> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302003D29B6D>
>>>>>> CL-USER> (ql:quickload 'mcclim)
>>>>>> To load "mcclim":
>>>>>> Load 1 ASDF system:
>>>>>> mcclim
>>>>>> ; Loading "mcclim"
>>>>>> Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE"
>>>>>> .
>>>>>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.
>>>>>> Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*.
>>>>>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>.
>>>>>> CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre)
>>>>>>
>>>>>> #<TEST-OP>
>>>>>> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302004049A2D>
>>>>>>
>>>>>>> On Apr 7, 2019, at 11:57 AM, David Dmytryk <ddmytryk at icloud.com> wrote:
>>>>>>>
>>>>>>> It is installed in home folder ~quicklisp/dists/quicklisp/software/cl-ppcre-20180831-git/cl-ppcre-unicode
>>>>>>>
>>>>>>> May have made a mess with location?
>>>>>>>
>>>>>>>> On Apr 7, 2019, at 11:48 AM, Stas Boukarev <stassats at gmail.com> wrote:
>>>>>>>>
>>>>>>>> So, is it working when you use the quicklisp one?
>>>>>>>>
>>>>>>>>> On Sun, Apr 7, 2019 at 6:47 PM David Dmytryk <ddmytryk at icloud.com> wrote:
>>>>>>>>>
>>>>>>>>> Thanks for responding Stas
>>>>>>>>>
>>>>>>>>> Yes - it is
>>>>>>>>>
>>>>>>>>> David
>>>>>>>>>
>>>>>>>>>> On Apr 7, 2019, at 11:45 AM, Stas Boukarev <stassats at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Is your cl-ppcre not coming from quicklisp?
>>>>>>>>>>
>>>>>>>>>>> On Sun, Apr 7, 2019 at 6:23 PM David Dmytryk <ddmytryk at icloud.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi
>>>>>>>>>>>
>>>>>>>>>>> Wondering if anybody could help with solution or advice on installing McCLIM on macOS Mojave, running CCL under Emacs / Slime (Clozure Common Lisp Version 1.12-dev (v1.12-dev.4-6-gc3b1e184) DarwinX8664).
>>>>>>>>>>>
>>>>>>>>>>> I tried to install using Quicklisp and received error response as below.
>>>>>>>>>>>
>>>>>>>>>>> I am new to lisp, and heavily in learning-mode - would appreciate any help.
>>>>>>>>>>>
>>>>>>>>>>> Kind Regards
>>>>>>>>>>>
>>>>>>>>>>> David Dmytryk
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> CL-USER> (ql:quickload 'mcclim)
>>>>>>>>>>> To load "mcclim":
>>>>>>>>>>> Load 1 ASDF system:
>>>>>>>>>>> mcclim
>>>>>>>>>>> ; Loading "mcclim"
>>>>>>>>>>> Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE"
>>>>>>>>>>> .
>>>>>>>>>>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.
>>>>>>>>>>> Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*.
>>>>>>>>>>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>.
>>>>>>>>>
>>>>
>>
>>
>>
>
> --
> "economics is a pseudoscience; the astrology of our time"
> Kim Stanley Robinson
More information about the mcclim-devel
mailing list