[Gsll-devel] Snow Leopard install

[David Dreisigmeyer]

I tried this -- no go, including using gsl-devel.  Also installed gsl from
source and gsll still won't install.  I'm going to try with ccl now.

On Mon, Aug 16, 2010 at 10:47 AM, Glen Henshaw <glen.henshaw at gmail.com>wrote:

> It would be
>
> > sudo port selfupdate
> > sudo port upgrade gsl
>
> Assuming you are using macports. I don't know what the fink equivalent
> would be.
>
> Glen
>
> Glen Henshaw, PhD • Roboticist • U.S. Naval Research Laboratory
> office: 202-767-1196 • google voice/mobile: 443-295-3050
> glen.henshaw at nrl.navy.mil
>
> On Aug 15, 2010, at 3:44 PM, James Wright <james at chumsley.org> wrote:
>
> > Hi David,
> >
> > The command I gave (darcs send) was the command that I used to
> > generate the patch, not to apply it.  (i.e., I generated a patch that
> > Liam could send to the clbuild project to get gsll included in the
> > stock clbuild install).
> >
> > If you have already added the lines that Liam described, then my patch
> > is probably irrelevant to you.  If you haven't added the lines and
> > want to use my patch to do so, then you could try
> >
> > darcs apply gsll-clbuild.patch
> >
> > followed by
> >
> > ./clbuild install gsll
> >
> > From the errors you've listed, I can't really see what's going wrong,
> > but it doesn't look to me to be clbuild related.  Have you got the
> > development version of libgsl installed?  I used
> >
> > sudo apt-get install libgsl0-dev
> >
> > to install the headers and so forth for libgsl on my Ubuntu box; I
> > don't know what the OS X equivalent would be.
> >
> > hth,
> >      James
> >
> > On Sun, Aug 15, 2010 at 8:18 AM, David Dreisigmeyer
> > <david.dreisigmeyer at gmail.com> wrote:
> >> Hi James,
> >> Am I doing this correctly(?):
> >> new-host:clbuild daviddreisigmeyer$ ls
> >> .                          .core-is-stale
> >> clbuild-bash-completion.sh dependencies               implementations
> >>      systems
> >> ..                         _darcs
> clbuild.conf.default
> >>     doc                        projects                   target
> >> .DS_Store                  clbuild                    clbuild.lisp
> >>     gsll-clbuild.patch         source                     wnpp-projects
> >> new-host:clbuild daviddreisigmeyer$ darcs send -o gsll-clbuild.patch
> >> Creating patch to "http://common-lisp.net/project/clbuild/clbuild"...
> >> No recorded local changes to send!
> >> new-host:clbuild daviddreisigmeyer$
> >>
> >> Here's part of the error from emacs using (asdf:operate 'asdf:load-op
> >> :gsll):
> >>   7: (CFFI-GROVEL::GENERATE-C-FILE
> >>
> #P"/Users/daviddreisigmeyer/lisp/clbuild/clbuild/source/gsll/init/libgsl-unix.lisp"
> >>
> #P"/Users/daviddreisigmeyer/lisp/clbuild/clbuild/source/gsll/init/libgsl-unix.fasl")
> >>       Locals:
> >>         SB-DEBUG::ARG-0 =
> >>
> #P"/Users/daviddreisigmeyer/lisp/clbuild/clbuild/source/gsll/init/libgsl-un..
> >>         SB-DEBUG::ARG-1 =
> >>
> #P"/Users/daviddreisigmeyer/lisp/clbuild/clbuild/source/gsll/init/libgsl-un..
> >>
> >> The file libgsl-unix.c that's generated (?) is empty also -- don't know
> if
> >> that helps.
> >> On Fri, Aug 13, 2010 at 4:11 PM, James Wright <james at chumsley.org>
> wrote:
> >>>
> >>> Hi Liam,
> >>>
> >>>> Yeah, well the clbuild instructions *used* to be on the web page, but
> >>>> I took them out because
> >>>> of all the changes, and I just figured I'd get the clbuild people to
> >>>> add appropriate lines.
> >>>> That didn't happen in turn because I can't figure out how to make a
> >>>> darcs diff which is
> >>>> how they take all patches.
> >>>
> >>> I've generated a darcs diff from the stock clbuild.  It's attached in
> >>> case that is helpful.  The command that I used was "darcs send -o
> >>> gsll-clbuild.patch".
> >>>
> >>>      James
> >>>
> >>> _______________________________________________
> >>> Gsll-devel mailing list
> >>> Gsll-devel at common-lisp.net
> >>> http://common-lisp.net/cgi-bin/mailman/listinfo/gsll-devel
> >>>
> >>
> >>
> >
> > _______________________________________________
> > Gsll-devel mailing list
> > Gsll-devel at common-lisp.net
> > http://common-lisp.net/cgi-bin/mailman/listinfo/gsll-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.common-lisp.net/pipermail/gsll-devel/attachments/20100816/7694752b/attachment.html>