[Ecls-list] failure on cygwin

Juan Jose Garcia-Ripoll juanjose.garciaripoll at googlemail.com
Sat Oct 24 11:56:53 UTC 2009


This version of the GMP library does not support cygwin. I do not know
whether you will have better luck with the pre-installed version
coming with it, though.

Juanjo

On Sat, Oct 24, 2009 at 11:36 AM, Martin Rubey
<martin.rubey at math.uni-hannover.de> wrote:
> Dear all
>
> I tried to build on cygwin, but had the following failure:
>
> Please let me know if you need any more information.
>
> All the best,
>
> Martin
>
> configure: Using internal version of libatomic_ops
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating bdw-gc.pc
> config.status: executing depfiles commands
> config.status: executing default commands
> configure: creating ./config.status
> config.status: creating bare.lsp
> config.status: creating lsp/load.lsp
> config.status: creating clos/load.lsp
> config.status: creating cmp/load.lsp
> config.status: creating ../Makefile
> config.status: WARNING:  '../Makefile.in' seems to ignore the
> --datarootdir sett
> ing
> config.status: creating Makefile
> config.status: creating c/Makefile
> config.status: creating doc/Makefile
> config.status: WARNING:  '/home/Kloster/ecl-9.10.2/src/doc/Makefile.in'
> seems to
>  ignore the --datarootdir setting
> config.status: creating doc/ecl.man
> config.status: creating doc/ecl-config.man
> config.status: creating ecl/configpre.h
> config.status: creating bin/ecl-config.pre
> config.status: creating lsp/config.pre
> config.status: creating compile.pre
> config.status: creating cmp/cmpdefs.pre
> config.status: creating ecl/config.h
> Configuration complete. To build ECL, issue make in this directory.
>
> Kloster at buero ~/ecl-9.10.2
> $ make
> cd build; make
> make[1]: Entering directory `/home/Kloster/ecl-9.10.2/build'
> cp /home/Kloster/ecl-9.10.2/src/util/gdbinit .gdbinit
> if (echo c gmp gc | grep gmp); then \
>          cd gmp && make install && \
>          cd .. && mv include/gmp.h ecl/ && rmdir include &&  \
>          mv ./libgmp.a ./libeclgmp.a; \
>        fi
> c gmp gc
> make[2]: Entering directory `/home/Kloster/ecl-9.10.2/build/gmp'
> gcc  `test -f 'gen-fac_ui.c' || echo
> '/home/Kloster/ecl-9.10.2/src/gmp/'`gen-fac
> _ui.c -o gen-fac_ui.exe
> ./gen-fac_ui 32 0 >mpz/fac_ui.h || (rm -f mpz/fac_ui.h; exit 1)
> gcc  `test -f 'gen-fib.c' || echo
> '/home/Kloster/ecl-9.10.2/src/gmp/'`gen-fib.c
> -o gen-fib.exe
> ./gen-fib header 32 0 >fib_table.h || (rm -f fib_table.h; exit 1)
> ./gen-fib table 32 0 >mpn/fib_table.c || (rm -f mpn/fib_table.c; exit 1)
> gcc  `test -f 'gen-bases.c' || echo
> '/home/Kloster/ecl-9.10.2/src/gmp/'`gen-base
> s.c -o gen-bases.exe -lm
> ./gen-bases header 32 0 >mp_bases.h || (rm -f mp_bases.h; exit 1)
> ./gen-bases table 32 0 >mpn/mp_bases.c || (rm -f mpn/mp_bases.c; exit 1)
> gcc  `test -f 'gen-psqr.c' || echo
> '/home/Kloster/ecl-9.10.2/src/gmp/'`gen-psqr.
> c -o gen-psqr.exe -lm
> ./gen-psqr 32 0 >mpn/perfsqr.h || (rm -f mpn/perfsqr.h; exit 1)
> make  install-recursive
> make[3]: Entering directory `/home/Kloster/ecl-9.10.2/build/gmp'
> Making install in tests
> make[4]: Entering directory `/home/Kloster/ecl-9.10.2/build/gmp/tests'
> Making install in .
> make[5]: Entering directory `/home/Kloster/ecl-9.10.2/build/gmp/tests'
> make[6]: Entering directory `/home/Kloster/ecl-9.10.2/build/gmp/tests'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory `/home/Kloster/ecl-9.10.2/build/gmp/tests'
> make[5]: Leaving directory `/home/Kloster/ecl-9.10.2/build/gmp/tests'
> Making install in devel
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/devel'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/devel'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/devel'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/devel'
> Making install in mpn
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpn'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpn'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpn'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpn'
> Making install in mpz
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpz'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpz'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpz'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpz'
> Making install in mpq
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpq'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpq'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpq'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpq'
> Making install in mpf
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpf'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpf'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpf'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpf'
> Making install in rand
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/rand'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/rand'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/rand'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/rand'
> Making install in misc
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/misc'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/misc'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/misc'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/misc'
> Making install in cxx
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/cxx'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/cxx'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/cxx'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/cxx'
> Making install in mpbsd
> make[5]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpbsd'
> make[6]: Entering directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpbsd'
> make[6]: Nothing to be done for `install-exec-am'.
> make[6]: Nothing to be done for `install-data-am'.
> make[6]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpbsd'
> make[5]: Leaving directory
> `/home/Kloster/ecl-9.10.2/build/gmp/tests/mpbsd'
> make[4]: Leaving directory `/home/Kloster/ecl-9.10.2/build/gmp/tests'
> Making install in mpn
> make[4]: Entering directory `/home/Kloster/ecl-9.10.2/build/gmp/mpn'
> /bin/sh ../libtool --mode=compile gcc  -DHAVE_CONFIG_H
> -I. -I/home/Kloster/ecl-9
> .10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
> -I/home/Kloster/ecl-9.10.2/src/gmp -DO
> PERATION_`echo fib_table | sed 's/_$//'`    -g -O2   -c -o fib_table.lo
> fib_tabl
> e.c
>  gcc -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_WIT
> HIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_fib_table -g -O2
> -c fib_t
> able.c  -DPIC -o fib_table.o
> /bin/sh ../libtool --mode=compile gcc  -DHAVE_CONFIG_H
> -I. -I/home/Kloster/ecl-9
> .10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
> -I/home/Kloster/ecl-9.10.2/src/gmp -DO
> PERATION_`echo mp_bases | sed 's/_$//'`    -g -O2   -c -o mp_bases.lo
> mp_bases.c
>
>  gcc -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_WIT
> HIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_mp_bases -g -O2
>  -c mp_bas
> es.c  -DPIC -o mp_bases.o
> /bin/sh ../libtool --mode=compile gcc  -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9
> .10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/ecl-9.10.2/src/gmp -DO
> PERATION_`echo add | sed 's/_$//'`    -g -O2   -c -o add.lo add.c
>  gcc -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_WIT
> HIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_add -g -O2 -c
>  add.c  -DPI
> C -o add.o
> /bin/sh ../libtool --mode=compile gcc  -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9
> .10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/ecl-9.10.2/src/gmp -DO
> PERATION_`echo add_1 | sed 's/_$//'`    -g -O2   -c -o add_1.lo add_1.c
>  gcc -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_WIT
> HIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_add_1 -g -O2 -c
>  add_1.c
> -DPIC -o add_1.o
> /bin/sh ../libtool --mode=compile --tag=CC
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
>  -DOPERATION_`ech
> o add_n | sed 's/_$//'`    -g -O2   `test -f 'add_n.asm' || echo
>  '/home/Kloster/
> ecl-9.10.2/src/gmp/mpn/'`add_n.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_add_n -g -O2 add_n.asm  -DPIC -o add_n.o
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_add_n -DPIC add_n.asm
>  >tmp-ad
> d_n.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_add_n -g -O2
>  tmp-add_n
> .s -DPIC -o add_n.o
> rm -f tmp-add_n.s
> /bin/sh ../libtool --mode=compile gcc  -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9
> .10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/ecl-9.10.2/src/gmp -DO
> PERATION_`echo sub | sed 's/_$//'`    -g -O2   -c -o sub.lo sub.c
>  gcc -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_WIT
> HIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_sub -g -O2 -c
>  sub.c  -DPI
> C -o sub.o
> /bin/sh ../libtool --mode=compile gcc  -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9
> .10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/ecl-9.10.2/src/gmp -DO
> PERATION_`echo sub_1 | sed 's/_$//'`    -g -O2   -c -o sub_1.lo sub_1.c
>  gcc -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_WIT
> HIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_sub_1 -g -O2 -c
>  sub_1.c
> -DPIC -o sub_1.o
> /bin/sh ../libtool --mode=compile --tag=CC
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
>  -DOPERATION_`ech
> o sub_n | sed 's/_$//'`    -g -O2   `test -f 'sub_n.asm' || echo
>  '/home/Kloster/
> ecl-9.10.2/src/gmp/mpn/'`sub_n.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_sub_n -g -O2 sub_n.asm  -DPIC -o sub_n.o
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_sub_n -DPIC sub_n.asm
>  >tmp-su
> b_n.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_sub_n -g -O2
>  tmp-sub_n
> .s -DPIC -o sub_n.o
> rm -f tmp-sub_n.s
> /bin/sh ../libtool --mode=compile --tag=CC
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
>  -DOPERATION_`ech
> o mul_1 | sed 's/_$//'`    -g -O2   `test -f 'mul_1.asm' || echo
>  '/home/Kloster/
> ecl-9.10.2/src/gmp/mpn/'`mul_1.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_mul_1 -g -O2 mul_1.asm  -DPIC -o mul_1.o
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_mul_1 -DPIC mul_1.asm
>  >tmp-mu
> l_1.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_mul_1 -g -O2
>  tmp-mul_1
> .s -DPIC -o mul_1.o
> rm -f tmp-mul_1.s
> /bin/sh ../libtool --mode=compile --tag=CC
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
>  -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
>  -DOPERATION_`ech
> o addmul_1 | sed 's/_$//'`    -g -O2   `test -f 'addmul_1.asm' || echo
>  '/home/Kl
> oster/ecl-9.10.2/src/gmp/mpn/'`addmul_1.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_addmul_1 -g -O2 addmul_1.asm  -DPIC -o
>  addmul_1.o
>
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_addmul_1 -DPIC
> addmul_1.asm >
> tmp-addmul_1.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_addmul_1 -g
> -O2 tmp-ad
> dmul_1.s -DPIC -o addmul_1.o
> rm -f tmp-addmul_1.s
> /bin/sh ../libtool --mode=compile --tag=CC
> /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
> -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
> -DOPERATION_`ech
> o submul_1 | sed 's/_$//'`    -g -O2   `test -f 'submul_1.asm' || echo
> '/home/Kl
> oster/ecl-9.10.2/src/gmp/mpn/'`submul_1.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_submul_1 -g -O2 submul_1.asm  -DPIC -o
> submul_1.o
>
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_submul_1 -DPIC
> submul_1.asm >
> tmp-submul_1.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_submul_1 -g
> -O2 tmp-su
> bmul_1.s -DPIC -o submul_1.o
> rm -f tmp-submul_1.s
> /bin/sh ../libtool --mode=compile --tag=CC
> /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
> -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
> -DOPERATION_`ech
> o lshift | sed 's/_$//'`    -g -O2   `test -f 'lshift.asm' || echo
> '/home/Kloste
> r/ecl-9.10.2/src/gmp/mpn/'`lshift.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_lshift -g -O2 lshift.asm  -DPIC -o
> lshift.o
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_lshift -DPIC
> lshift.asm >tmp-
> lshift.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_lshift -g -O2
> tmp-lshi
> ft.s -DPIC -o lshift.o
> rm -f tmp-lshift.s
> /bin/sh ../libtool --mode=compile --tag=CC
> /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
> -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
> -DOPERATION_`ech
> o rshift | sed 's/_$//'`    -g -O2   `test -f 'rshift.asm' || echo
> '/home/Kloste
> r/ecl-9.10.2/src/gmp/mpn/'`rshift.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_rshift -g -O2 rshift.asm  -DPIC -o
> rshift.o
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_rshift -DPIC
> rshift.asm >tmp-
> rshift.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_rshift -g -O2
> tmp-rshi
> ft.s -DPIC -o rshift.o
> rm -f tmp-rshift.s
> /bin/sh ../libtool --mode=compile --tag=CC
> /home/Kloster/ecl-9.10.2/src/gmp/mpn/
> m4-ccas --m4="m4" gcc  -c -DHAVE_CONFIG_H
> -I. -I/home/Kloster/ecl-9.10.2/src/gmp
> /mpn -I.. -D__GMP_WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp
> -DOPERATION_`ech
> o dive_1 | sed 's/_$//'`    -g -O2   `test -f 'dive_1.asm' || echo
> '/home/Kloste
> r/ecl-9.10.2/src/gmp/mpn/'`dive_1.asm
>  /home/Kloster/ecl-9.10.2/src/gmp/mpn/m4-ccas --m4=m4 gcc -c
>  -DHAVE_CONFIG_H -I.
>  -I/home/Kloster/ecl-9.10.2/src/gmp/mpn -I.. -D__GMP_WITHIN_GMP
>  -I/home/Kloster/
> ecl-9.10.2/src/gmp -DOPERATION_dive_1 -g -O2 dive_1.asm  -DPIC -o
> dive_1.o
> m4  -DHAVE_CONFIG_H -D__GMP_WITHIN_GMP -DOPERATION_dive_1 -DPIC
> dive_1.asm >tmp-
> dive_1.s
>  gcc -c -DHAVE_CONFIG_H -I. -I/home/Kloster/ecl-9.10.2/src/gmp/mpn
>  -I.. -D__GMP_
> WITHIN_GMP -I/home/Kloster/ecl-9.10.2/src/gmp -DOPERATION_dive_1 -g -O2
> tmp-dive
> _1.s -DPIC -o dive_1.o
> /usr/lib/gcc/i686-pc-cygwin/3.4.4/../../../../i686-pc-cygwin/bin/as: BFD
> (GNU Bi
> nutils) 2.18.50.20080625 assertion fail
> /netrel/src/binutils-20080624-2/bfd/coff
> -i386.c:579
> tmp-dive_1.s: Assembler messages:
> tmp-dive_1.s:121: Error: cannot represent relocation type
> BFD_RELOC_386_GOTPC
> make[4]: *** [dive_1.lo] Error 1
> make[4]: Leaving directory `/home/Kloster/ecl-9.10.2/build/gmp/mpn'
> make[3]: *** [install-recursive] Error 1
> make[3]: Leaving directory `/home/Kloster/ecl-9.10.2/build/gmp'
> make[2]: *** [install] Error 2
> make[2]: Leaving directory `/home/Kloster/ecl-9.10.2/build/gmp'
> make[1]: *** [libeclgmp.a] Error 2
> make[1]: Leaving directory `/home/Kloster/ecl-9.10.2/build'
> make: *** [all] Error 2
>
> Kloster at buero ~/ecl-9.10.2
> $
>
> ----------
>
> ------------------------------------------------------------------------------
> Come build with us! The BlackBerry(R) Developer Conference in SF, CA
> is the only developer event you need to attend this year. Jumpstart your
> developing skills, take BlackBerry mobile applications to market and stay
> ahead of the curve. Join us from November 9 - 12, 2009. Register now!
> http://p.sf.net/sfu/devconference
> _______________________________________________
> Ecls-list mailing list
> Ecls-list at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ecls-list
>



-- 
Instituto de Física Fundamental, CSIC
c/ Serrano, 113b, Madrid 28006 (Spain)
http://juanjose.garciaripoll.googlepages.com




More information about the ecl-devel mailing list