[cmucl-cvs] [git] CMU Common Lisp branch rearrange-dir updated. release-20c-20-g26f37ca
Raymond Toy
rtoy at common-lisp.net
Sun Nov 6 05:51:34 UTC 2011
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "CMU Common Lisp".
The branch, rearrange-dir has been updated
via 26f37caf6696a9a8816c5872526c88d94845c187 (commit)
from 4f7056212a2c6de20d0ae59776e9c29cdb4e9d26 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 26f37caf6696a9a8816c5872526c88d94845c187
Author: Raymond Toy <toy.raymond at gmail.com>
Date: Sat Nov 5 22:51:11 2011 -0700
Update paths to new locations.
diff --git a/BUILDING b/BUILDING
index 675cb99..c11ef26 100644
--- a/BUILDING
+++ b/BUILDING
@@ -55,17 +55,14 @@ Setting up a build environment
or, if you want to use the git sources directly:
- git clone git://common-lisp.net/projects/cmucl/cmucl.git src
-
- (The "src" is important to keep everything the same with git as it
- was with cvs.)
+ git clone git://common-lisp.net/projects/cmucl/cmucl.git
Whatever you do, the sources must be in a directory named src
inside the base directory. Since the build tools keep all
generated files in separate target directories, the src directory
can be read-only (e.g. mounted read-only via NFS, etc.)
- The build tools are all in the src/tools directory.
+ The build tools are all in the bin directory.
That's it, you are now ready to build CMU CL.
@@ -82,7 +79,7 @@ a) Simple builds
Use this to build from a version of CMUCL that is very close to the
sources you are trying to build now:
- src/tools/build.sh -C "" -o "<name-of-old-lisp> <options-to-lisp>"
+ bin/build.sh -C "" -o "<name-of-old-lisp> <options-to-lisp>"
This will build CMUCL 3 times, each time with the result of the
previous build. The last time, the additional libraries like CLX,
@@ -101,7 +98,7 @@ b) Slightly more complicated builds
For these, you can use this:
- src/tools/build.sh -C "" -o "<old-lisp>" -B boot1.lisp -B boot2.lisp
+ bin/build.sh -C "" -o "<old-lisp>" -B boot1.lisp -B boot2.lisp
The bootstrap files listed with the -B option (as many as needed)
are loaded in order, so be sure to get them right.
@@ -124,8 +121,8 @@ read the bootfiles for additional instructions, if any.
If there are no bootfiles, then you can use a) above.
-The build.sh script supports other options, and src/tools/build.sh -?
-will give a quick summary. Read src/tools/build.sh for more
+The build.sh script supports other options, and bin/build.sh -?
+will give a quick summary. Read bin/build.sh for more
information.
A general outline of the build process
@@ -219,10 +216,10 @@ To complete the build so that you something similar to what the
releases of CMUCL do, there are a few more steps:
e) Build the utilities like Gray streams, simple streams, CLX, CLM,
- and Hemlock. Use the src/tools/build-utils.sh script for this, as
+ and Hemlock. Use the bin/build-utils.sh script for this, as
described below
-f) Create tarfiles using the src/tools/make-dist.sh script, as
+f) Create tarfiles using the bin/make-dist.sh script, as
explained below.
With these tarfiles, you can install them anywhere. The contents of
@@ -246,13 +243,13 @@ the scripts included with this little text?
Overview of the included build scripts
--------------------------------------
-* src/tools/build.sh [-123obvuBCU?]
+* bin/build.sh [-123obvuBCU?]
This is the main build script. It essentially calls the other build
scripts described below in the proper sequence to build cmucl from an
existing binary of cmucl.
-* src/tools/create-target.sh target-directory [lisp-variant [motif-variant]]
+* bin/create-target.sh target-directory [lisp-variant [motif-variant]]
This script creates a new target directory, which is a shadow of the
source directory, that will contain all the files that are created by
@@ -290,7 +287,7 @@ sample setenv.lisp includes a set of features that should work for the
intended configuration. Note also that some adding or removing some
features may require a cross-compile instead of a normal compile.
-* src/tools/clean-target.sh [-l] target-directory [more dirs]
+* bin/clean-target.sh [-l] target-directory [more dirs]
Cleans the given target directory, so that all created files will be
removed. This is useful to force recompilation. If the -l flag is
@@ -298,7 +295,7 @@ given, then the C runtime is also removed, including all the lisp
executable, any lisp cores, all object files, lisp.nm, internals.h,
and the config file.
-* src/tools/build-world.sh target-directory [build-binary] [build-flags...]
+* bin/build-world.sh target-directory [build-binary] [build-flags...]
Starts a complete world build for the given target, using the lisp
binary/core specified as a build host. The recompilation step will
@@ -309,13 +306,13 @@ step of the world build will inform you of that fact. In that case,
you'll have to use the rebuild-lisp.sh script, and then restart the
world build process with build-world.sh
-* src/tools/rebuild-lisp.sh target-directory
+* bin/rebuild-lisp.sh target-directory
This script will force a complete recompilation of the C runtime code
of CMU CL (aka the lisp executable). Doing this will necessitate
building a new kernel.core file, using build-world.sh.
-* src/tools/load-world.sh target-directory version
+* bin/load-world.sh target-directory version
This will finish the CMU CL rebuilding process, by loading the
remaining compiled files generated in the world build process into the
@@ -330,14 +327,14 @@ ISO8601 format is often a good idea, e.g. "18d+ 2002-05-06" for a
binary that is based on sources current on the 6th May, 2002, which is
post the 18d release.
-* src/tools/build-utils.sh target-directory
+* bin/build-utils.sh target-directory
This script will build auxiliary libraries packaged with CMU CL,
including CLX, CMUCL/Motif, the Motif debugger, inspector, and control
panel, and the Hemlock editor. It will use the lisp executable and
core of the given target.
-* src/tools/make-dist.sh [-bg] [-G group] [-O owner] target-directory version arch os
+* bin/make-dist.sh [-bg] [-G group] [-O owner] target-directory version arch os
This script creates both main and extra distribution tarballs from the
given target directory, using the make-main-dist.sh and
@@ -369,7 +366,7 @@ names will have the form:
Of course, the "bz2" will be "gz" if you specified gzip compression
instead of bzip.
-* /src/tools/make-main-dist.sh target-directory version arch os
+* /bin/make-main-dist.sh target-directory version arch os
This is script is not normally invoked by the user; make-dist will do
it appropriately.
@@ -382,7 +379,7 @@ simple streams.
This is intended to be run from make-dist.sh.
-* src/tools/make-extra-dist.sh target-directory version arch os
+* bin/make-extra-dist.sh target-directory version arch os
This is script is not normally invoked by the user; make-dist will do
it appropriately.
@@ -426,7 +423,7 @@ Set up everything as described in the setup section above. Then
execute:
# Create a new target directory structure/config for OpenBSD:
-src/tools/create-target.sh openbsd OpenBSD_gencgc OpenBSD
+bin/create-target.sh openbsd OpenBSD_gencgc OpenBSD
# edit openbsd/setenv.lisp to contain what we want:
cat <<EOF > openbsd/setenv.lisp
@@ -452,7 +449,7 @@ cat <<EOF > openbsd/setenv.lisp
EOF
# Recompile the lisp world, and dump a new kernel.core:
-src/tools/build-world.sh openbsd lisp # Or whatever you need to invoke your
+bin/build-world.sh openbsd lisp # Or whatever you need to invoke your
# current lisp binary+core
# If build-world tells you (as it will the first time) that:
@@ -462,15 +459,15 @@ src/tools/build-world.sh openbsd lisp # Or whatever you need to invoke your
# build-world.sh:
# Recompile lisp binary itself:
-src/tools/rebuild-lisp.sh openbsd
+bin/rebuild-lisp.sh openbsd
# Restart build-world.sh now:
-src/tools/build-world.sh openbsd lisp
+bin/build-world.sh openbsd lisp
# Now we populate the kernel.core with further compiled files,
# and dump the final lisp.core file:
-src/tools/load-world.sh openbsd "18d+ 2002-05-06"
+bin/load-world.sh openbsd "18d+ 2002-05-06"
# The second argument above is the version number that the built
# core will announce. Please always put the build-date and some
@@ -555,8 +552,8 @@ up-to-date with the current sources.
Create a cross-compiler directory to hold the cross-compiler
and a target directory to hold the result:
- src/tools/create-target.sh xcross
- src/tools/create-target.sh xtarget
+ bin/create-target.sh xcross
+ bin/create-target.sh xtarget
2. Adjust cross-compilation script
@@ -592,13 +589,13 @@ up-to-date with the current sources.
3. Build the cross compiler and target
Now compile the result:
- src/tools/cross-build-world.sh xtarget xcross xtarget/cross.lisp [v9 binary]
+ bin/cross-build-world.sh xtarget xcross xtarget/cross.lisp [v9 binary]
4. Rebuild the lisp files:
When this finishes, you need to compile the C code:
- src/tools/rebuild-lisp.sh xtarget
+ bin/rebuild-lisp.sh xtarget
At this point, you may want to run cross-build-world.sh again
to generate a new kernel.core. It shouldn't build anything;
@@ -608,7 +605,7 @@ up-to-date with the current sources.
With the new kernel.core, we need to create a lisp.core:
- src/tools/load-world.sh xtarget "new lisp"
+ bin/load-world.sh xtarget "new lisp"
Test the result with
@@ -635,8 +632,8 @@ same file system, via NFS or something else.
compiled target. We assume we are on ppc/darwin. So, when running
create-target.sh we need to specify the target:
- src/tools/create-target.sh x86-cross x86
- src/tools/create-target.sh x86-target x86
+ bin/create-target.sh x86-cross x86
+ bin/create-target.sh x86-target x86
2. Adjust the cross-compilation script. An example for ppc/darwin to
x86/linux is in src/tools/cross-scripts/cross-ppc-x86.lisp.
@@ -644,7 +641,7 @@ same file system, via NFS or something else.
3. Build the cross compiler and target, as above, using the specified
cross-compile script:
- src/tools/cross-build-world.sh x86-target x86-cross cross.lisp [ppc binary]
+ bin/cross-build-world.sh x86-target x86-cross cross.lisp [ppc binary]
where cross.lisp is the cross-compile script from 2) above.
@@ -661,13 +658,13 @@ same file system, via NFS or something else.
Compile the lisp code:
- src/tools/rebuild-lisp.sh x86-target
+ bin/rebuild-lisp.sh x86-target
5. Now run load-world.sh to create the desired lisp.core from lisp and
kernel.core. As above, PCL has not been compiled, so select
restart 3 (return nil from pclload) to create lisp.core
- src/tools/load-world.sh x86-target "new x86"
+ bin/load-world.sh x86-target "new x86"
At this point, you will have a shiny new lisp on the new platform.
Since it's missing PCL, you will need to do at least one normal build
-----------------------------------------------------------------------
Summary of changes:
BUILDING | 69 +++++++++++++++++++++++++++++--------------------------------
1 files changed, 33 insertions(+), 36 deletions(-)
hooks/post-receive
--
CMU Common Lisp
More information about the cmucl-cvs
mailing list